Ground source heat pumps
Ground/water heat pump for a reasonable price for convenient heating and excellent hot water comfort. Thanks to its quiet operation, it is suitable for installation close to residential premises. The Vitocal 200-G heat pump is an attractive alternative to the 300 series in terms of price. With cooling circuits with fixed heating power (in five power ranges), it covers a wide range of applications with good efficiency. The heat pump has very compact dimensions: the pumps of the primary and secondary circuits and the three-way valve are already installed in the heat pump housing. Low operating costs due to the high SCOP value (SCOP = seasonal coefficient of performance) in accordance with EN 14825: up to 5.3 for average climatic conditions and applications at low temperature (W35).
Ground/water heat pump for a reasonable price for convenient heating and excellent hot water comfort. Thanks to its quiet operation, it is suitable for installation close to residential premises. The Vitocal 200-G heat pump is an attractive alternative to the 300 series in terms of price. With cooling circuits with fixed heating power (in five power ranges), it covers a wide range of applications with good efficiency. The heat pump has very compact dimensions: the pumps of the primary and secondary circuits and the three-way valve are already installed in the heat pump housing. Low operating costs due to the high SCOP value (SCOP = seasonal coefficient of performance) in accordance with EN 14825: up to 5.3 for average climatic conditions and applications at low temperature (W35).
Ground/water heat pump for a reasonable price for convenient heating and excellent hot water comfort. Thanks to its quiet operation, it is suitable for installation close to residential premises. The Vitocal 200-G heat pump is an attractive alternative to the 300 series in terms of price. With cooling circuits with fixed heating power (in five power ranges), it covers a wide range of applications with good efficiency. The heat pump has very compact dimensions: the pumps of the primary and secondary circuits and the three-way valve are already installed in the heat pump housing. Low operating costs due to the high SCOP value (SCOP = seasonal coefficient of performance) in accordance with EN 14825: up to 5.3 for average climatic conditions and applications at low temperature (W35).
Ground/water heat pump for a reasonable price for convenient heating and excellent hot water comfort. Thanks to its quiet operation, it is suitable for installation close to residential premises. The Vitocal 200-G heat pump is an attractive alternative to the 300 series in terms of price. With cooling circuits with fixed heating power (in five power ranges), it covers a wide range of applications with good efficiency. The heat pump has very compact dimensions: the pumps of the primary and secondary circuits and the three-way valve are already installed in the heat pump housing. Low operating costs due to the high SCOP value (SCOP = seasonal coefficient of performance) in accordance with EN 14825: up to 5.3 for average climatic conditions and applications at low temperature (W35).
In the segment of ground/water source heat pumps the new "Vitocal 300-G" heat pump is the most effective solution for new buildings and the best choice for replacing older ground/water source heat pumps thanks to modern inverter technology. The power-regulated cooling circuit adapts the heat pump heating power to the corresponding heat consumption of the building. As a result, during half-load operation, the pump is turned on and off less frequently, which provides a higher annual efficiency. In addition, the RCD (Refrigerant Cycle Diagnostic System) system for power management provides extremely precise and fast control of the cooling circuit by regulating the electronic expansion valve. High-efficiency energy-saving pumps for the primary and heating circuits reduce energy consumption and costs. The small installation area, not exceeding 0.5 square meters, and access to all service-related components from the front allow for space savings.
Ground/water heat pump for a reasonable price for convenient heating and excellent hot water comfort. Thanks to its quiet operation, it is suitable for installation close to residential premises. The Vitocal 200-G heat pump is an attractive alternative to the 300 series in terms of price. With cooling circuits with fixed heating power (in five power ranges), it covers a wide range of applications with good efficiency. The heat pump has very compact dimensions: the pumps of the primary and secondary circuits and the three-way valve are already installed in the heat pump housing. Low operating costs due to the high SCOP value (SCOP = seasonal coefficient of performance) in accordance with EN 14825: up to 5.3 for average climatic conditions and applications at low temperature (W35).
In the segment of ground/water source heat pumps the new "Vitocal 300-G" heat pump is the most effective solution for new buildings and the best choice for replacing older ground/water source heat pumps thanks to modern inverter technology. The power-regulated cooling circuit adapts the heat pump heating power to the corresponding heat consumption of the building. As a result, during half-load operation, the pump is turned on and off less frequently, which provides a higher annual efficiency. In addition, the RCD (Refrigerant Cycle Diagnostic System) system for power management provides extremely precise and fast control of the cooling circuit by regulating the electronic expansion valve. High-efficiency energy-saving pumps for the primary and heating circuits reduce energy consumption and costs. The small installation area, not exceeding 0.5 square meters, and access to all service-related components from the front allow for space savings.
A compact, floor-mounted heat pump that doesn't take up much space and operates very quietly is suitable for installation even near living spaces. Thanks to modern ground/water heat pump inverter technology, the new generation Vitocal 333-G compact units are the most efficient solution for new buildings. The capacity-controlled cooling circuit adjusts the heat pump's heating power to the building's heat demand. As a result, there are fewer start/stop cycles in the partial load range and higher annual efficiency. The built-in 220-liter hot water tank of Vitocal 333-G achieves maximum water production above 300 liters (hot water temperature 40 °C) in efficiency class A + (XL profile) and maintains the maximum hot water temperature of 60 °C without electrical heating. A solar thermal system for preparing drinking water can be integrated by using a solar heat exchange kit as an option. The combination of a heat pump with Viessmann Vitovent ventilation system provides special living and operating convenience. Both devices can be easily controlled using the integrated control or choose a remote control. The heat pump can also cool rooms on hot summer days. This integrated cooling function requires an additional natural cooling block.
A compact, floor-mounted heat pump that doesn't take up much space and operates very quietly is suitable for installation even near living spaces. Thanks to modern ground/water heat pump inverter technology, the new generation Vitocal 333-G compact units are the most efficient solution for new buildings. The capacity-controlled cooling circuit adjusts the heat pump's heating power to the building's heat demand. As a result, there are fewer start/stop cycles in the partial load range and higher annual efficiency. The built-in 220-liter hot water tank of Vitocal 333-G achieves maximum water production above 300 liters (hot water temperature 40 °C) in efficiency class A + (XL profile) and maintains the maximum hot water temperature of 60 °C without electrical heating. A solar thermal system for preparing drinking water can be integrated by using a solar heat exchange kit as an option. The combination of a heat pump with Viessmann Vitovent ventilation system provides special living and operating convenience. Both devices can be easily controlled using the integrated control or choose a remote control. The heat pump can also cool rooms on hot summer days. This integrated cooling function requires an additional natural cooling block.
In the segment of ground/water source heat pumps the new "Vitocal 300-G" heat pump is the most effective solution for new buildings and the best choice for replacing older ground/water source heat pumps thanks to modern inverter technology. The power-regulated cooling circuit adapts the heat pump heating power to the corresponding heat consumption of the building. As a result, during half-load operation, the pump is turned on and off less frequently, which provides a higher annual efficiency. In addition, the RCD (Refrigerant Cycle Diagnostic System) system for power management provides extremely precise and fast control of the cooling circuit by regulating the electronic expansion valve. High-efficiency energy-saving pumps for the primary and heating circuits reduce energy consumption and costs. The small installation area, not exceeding 0.5 square meters, and access to all service-related components from the front allow for space savings.